Re: Rife / Bare Machines
CategoriesDear Ivan,
I am delighted that you are getting interested in electromedicine - a long time passion of mine.
I have investigated some of the current Rife work but feel construction for the uninitiated can be a bit complicated (except form a good kit) and expensive. Other cheaper alternatives such as the contact devices may be suitable in early stages to get a good grounding on the working concepts. Although the amazing curative properties come form a plasma device, which is what Rife originally build.
Electromedicine, though generally a lot safer and much more effective, can fall into the same trap as any other - in that - if the original cause is not discovered and dealt with then the resolution of the problem is generally not possible. I.e. nutritional deficiencies, environmental insults etc. In the main, if nutrition is adequate to good and the body able to detoxify well, then injuries and diseases can be cured miraculously.
I have purchased Jim Bare's Book (2 editions as they are continually revised, when more information is discovered) and his video walks you through construction. These are highly detailed for building a unit and worth getting. Meanwhile you can look at his patents. With this information I have, more or less, assembled a kit should ever a need arises. Also I can try to access one in an emergency from Fred Waters, who lives close by. He has build several of the Bare/Rife devices.
The most costly part is the power supply however, you can with some elbow grease build one, relatively cheaply, with a discarded computer switching power supply as long as the output is filtered well or use car batteries. Then there is the frequency generator however, you could use a CD or PC to reduce cost. Next is the linear amplifier which requires some good RF (radio frequency) construction techniques and I don't recommend that you make it unless you are familiar with RF circuitry. Finally, you will need a modulator and a neon and/or argon gas tube plus associated coax and matching unit etc. all of which you will have to purchase - be aware the tubes can be very fragile and damage during shipping and construction is common. All in All you could make this on the cheap for roughly C$700 to 1000 depending how adept you are with electronics. The Kits will cost more and probably are the way to go for most.
I highly recommend that you join the Rifers egrouip. There are other groups which you can find at Stan Trueman's site.
Dr. Bare has given freely his knowledge, time and worked tirelessly to advance the cause of this technology. The fruits are definitely showing as Bare/Rife fraternity just keeps growing by leaps and bounds - And he rightly and richly disserves his name beside Rife!
Chris Gupta
See also: Rife/John Crane scientific Research
At 11:26 AM 2004-04-02, you wrote:
Dear Chris,
I'm simply going crazy for the R. Rife's machine (http://www.rifetechnologies.com/parts.html ) and I would like to know more about it. Well, I would like to have one of this!
I just want to know if you already tried to build or if you bought one of this Rife's devices.
I see at http://www.resonantlight.com that they sell their own kit but it cost to much for me.
Could it be enough for me to buy the book and the tapes from here: http://www.rt66.com/~rifetech/order.html
or do you have some "tips and tricks" for me? :-)If the books are ok, can you indicate me the approximative costs of all the parts to build a complete and operating machine?
Please,
forgive my ADHD! ;-DDDDtnx in advance!
Love&LIGHT!!!!!!!!!!!!!!!!!!!!!!!!
Ivan Ingrilli'
http://www.newmediaexplorer.org/ivaningrilli/
http://www.laleva.cc - http://www.laleva.orgSee also:
Notes on Hulda Clark-2003 Rife Conf.
posted by Chris Gupta on Friday April 9 2004
updated on Saturday September 24 2005URL of this article:
http://www.newmediaexplorer.org/chris/2004/04/09/re_rife_bare_machines.htm
Related ArticlesBuild a Low cost & simple Magnetic Pulser
Finally, at long last here is an extensive update (of the 2003-08-19 original) that many have been requesting. Some additions are: - Basic 220/240 Volt AC Circuit. - A Simple auto pulsing Circuit. - 12 V DC Operation - High Power vs low power - discussion - Polarity of Coil. - Various other embellishments and updates - that should address many questions in the comments - Pictures of the Original... [read more]
February 19, 2009 - Chris GuptaMobile Phones Increase Tumor Risk, Study Says
Further to the post: Em Fields On Brain Tumor Incidence - Chemicals And Cell Phones Chris Gupta ---------------------- Mobile Phones Increase Tumor Risk, Study Says Thu Oct 14, 1:38 AM ET STOCKHOLM (Reuters) - Ten or more years of mobile phone use increases the risk of developing acoustic neuroma, a benign tumor on the auditory nerve, according to a study released on Wednesday by Sweden's Karolinska Institute. The risk was... [read more]
November 03, 2004 - Chris GuptaEm Fields On Brain Tumor Incidence - Chemicals And Cell Phones
..."In a series of studies, Hardell and colleagues have examined the relationship between the side of the head habitually used in operation of cellular and cordless phones and a possible relationship to the site of brain tumors ([Hardell et al., 2003]). The risk for ipsilateral (same side) use significantly increased the risk for astrocytoma for all types of phones, but use of the phone on the opposite side of the... [read more]
October 20, 2004 - Chris Gupta
